Welcome
People Research Publications Facilities Links

JOURNAL PUBLICATIONS

Journal Publications in 2008

L. Wang, D. Sipe and Q. Lin "A MEMS Thermal Biosensor for Metabolic Monitoring Applications," J. of Microelectromechanical Systems, 17: 318-327, 2008.

Journal Publications in 2007

J. Huang, B. Cusick, J. Pietrasik, L. Wang, T. Kowalewski, Q. Lin and K. Matyjaszewski, "Synthesis and In Situ Atomic Force Microscopy Characterization of Temperature-Responsive Hydrogels Based on Poly(2-(Dimethylamino)Ethyl Methacrylate) Prepared by Atom Transfer Radical Polymerization," Langmuir, 23: 241-249, 2007
A. Kusumo, L. Bombalski, Q. Lin, K. Matyjaszewski, T. Kowalewski, J. W. Schneider and R. D. Tilton, "High Capacity, Charge-Selective Protein Uptake by Polyelectrolyte Brushes," Langmuir, 23: 4448-4454, 2007.
B. Yang and Q. Lin, "A Planar Compliance-Based Self-Adaptive Microfluidic Variable Resistor," J. of Microelectromechanical Systems, 16: 411-419, 2007.
B. Yang and Q. Lin, "Planar Micro Check Valves Based on Polymer Compliance," Sensors and Actuators A: Physical, 134: 186-193, 2007.
B. Yang and Q. Lin, "A Latchable Micro Valve Using Paraffin Phase Change," Sensors and Actuators A: Physical, 134: 194-200, 2007.
Y.J. Zhao, S. Li, A. Davidson, B. Yang, Q. Wang and Q. Lin, "A MEMS Viscometric Device for Continuous Glucose Monitoring," J. of Micromechanics and Microengineering, 17: 2528-2537, 2007, 2007.

Journal Publications in 2006

Q. Lin, B. Yang, J. Xie and Y.C. Tai, "Dynamic simulation of a peristaltic micropump considering coupled fluid flow and structural motion," J. of Micromechanics and Microengineering, 17: 220-228, 2006.
Q. Lin, J.W. Burdick and E. Rimon, "Constructing Minimum Deflection Fixturing Arrangements Using Frame Invariant Norms," IEEE Trans. on Automation Science and Engineering, 3: 272-286, 2006.
Y. Wang, T. Mukherjee and Q. Lin, "Systematic Modeling and Design of Microfluidic Concentration Gradient Generators," J. of Micromechanics and Microengineering, 16: 2128-2137, 2006.
Y. Wang, Q. Lin and T. Mukherjee, "Composable Behavioral Models and Schematic-Based Simulation of Electrokinetic Lab-on-a-Chips," IEEE Trans. on Computer-Aided Design of Integrated Circuits and Systems, 25: 258-273, 2006.
B. Yang, B. Aksak, Q. Lin, and M. Sitti, "Compliant and Low-Cost Humidity Nanosensors using Nanoporous Polymer Membranes," Sensors and Actuators, B: Chemical, 114: 254-262, 2006.

Journal Publications in 2005

G.D. Ehrlich, P. Stoodley, S. Kathju, Y.J. Zhao, B.R. Mcleod, N. Baliban, F.Z. Hu, N.G. Sotereanos, J.W. Costerton, P.S. Stewart, J.C. Post, and Q. Lin, "Engineering Approaches for the Detection and Control of Orthopedic Biofilm Infections," Clinical Orthpaedics and Related Research, 437: 59-66, 2005.
Q. Lin, Y. Xu, F. Jiang, Y.C. Tai and C.M. Ho, "A Parametrized Three-Dimensional Model for MEMS Thermal Shear-Stress Sensors," J. of Microelectromechanical Systems, 14: 625- 633, 2005.
Y. Wang, Q. Lin and T. Mukherjee, "A Model for Laminar Diffusion-Based Complex Electrokinetic Passive Micromixers," Lab on a Chip, 5: 877-887, 2005.
Y. Xu, C.W. Chiu, F. Jiang, Q. Lin and Y.C. Tai, "A MEMS Multi-Sensor Chip for Flow Sensing," Sensors and Actuators, A: Physical, 121: 253-261, 2005.
Y. Xu, Q. Lin, G. Lin, F. Jiang, and Y.-C. Tai, "Micromachined Thermal Shear-Stress Sensor for Underwater Applications," J. of Microelectromechanical Systems, 14: 1023-1030, 2005.

Journal Publications in 2004

G.D. Ehrlich, F.Z. Hu, Q. Lin, J.W. Costerton and J.C. Post, "Intelligent Implants to Battle Biofilms," ASM News, American Society for Microbiology, 70: 127-133, 2004.
Q. Lin, J.W. Burdick and E. Rimon, "Computation and Analysis of Compliance in Grasping and Fixturing," IEEE Trans. on Robotics, 20: 651-667, 2004.
Q. Lin, F. Jiang, X. Wang, Y. Xu, Z. Han, Y.C. Tai, J. Lew and C.M. Ho, "Experiments and Simulations of MEMS Thermal Sensors for Wall Shear Stress Measurements in Aerodynamic Control Applications," J. of Micromechanics and Microengineering, 14: 1640-1649, 2004.
S. Liu, A. Davidson and Q. Lin, "Simulation Studies on Nonlinear Dynamics and Chaos in a MEMS Cantilever Control System," J. of Micromechanics and Microengineering, 14: 1064-1073, 2004.
Y. Wang, Q. Lin and T. Mukherjee, "System-Oriented Dispersion Models of General-Shaped Electrophoresis Microchannels," Lab on a Chip, 4: 453-463, 2004. (Selected as a Hot Article)
Y. Wang, Q. Lin and T. Mukherjee, "A Model for Joule Heating-Induced Dispersion in Microchip Electrophoresis," Lab on a Chip, 4: 625-631, 2004.
J. Xie, J. Shih, Q. Lin, B. Yang and Y.C. Tai, "Surface Micromachined Electrostatically Actuated Micro Peristaltic Pump," Lab on a Chip, 4: 495-501, 2004.

Journal Publications in 2002 and Prior

B. Yang, G.C. Lopez, A.J. Rosenbloom and Q. Lin, "Design and Rapid Fabrication of a Microfluidic Fraction Collector," Int. J. of Nonlinear Sciences and Numerical Simulation, 3 (3-4): 267-272, Sp. Iss. SI, 2002.
S. Wu, Q. Lin, Y. Yuen and Y.C. Tai, "MEMS Flow Sensors for Nano-fluidic Applications," Sensors and Actuators A: Physical, 89: 152-158, 2001.
Q. Lin, J.W. Burdick and E. Rimon, "A Stiffness-Based Quality Measure for Compliant Grasps and Fixtures," IEEE Trans. on Robotics and Automation, 16: 675-688, 2000.
Q. Lin and J.W. Burdick, "Objective and Frame-Invariant Kinematic Metric Functions for Rigid Bodies," Int. J. of Robotics Research, 19: 612-625, 2000.

PEER-REVIEWED CONFERENCE PUBLICATIONS

Conferences in 2008

T. Nguyen and Q. Lin, "Thermally Respnsive Aptamer Surfaces for Microfluidic Sample Preparation," Integration & Commercialization of Micro & Nanosystems International Conference & Exhibition, American Society of Mechanical Engineers, Hong Kong, 2008.
T. Nguyen, R. Pei, M. Stojanovic and Q. Lin, "An Integrated Microfluidic System for Affinity Extraction and Concentration of Biomolecules Coupled to MALDI-MS," IEEE Int. Conf. Micro Electro Mechanical Systems (MEMS '08), pp. 196-199, Tucson, AZ, 2008.
Y. Zhou, Y. Wang, T. Mukherjee and Q. Lin, "Design Synthesis and Experimental Validation of Microfluidic Concentration Gradient Generators," IEEE Int. Conf. Micro Electro Mechanical Systems (MEMS '08), pp. 579-582, Tucson, AZ, 2008.
Q. Lin, "Microelectromechanical Systems for Thermal Characterization and Manipulation of Biomolecules," Micro/Nanoscale Heat Transfer International Conference (MNHT08), American Society of Mechanical Engineers, Tainan, Taiwan, 2008.

Conferences in 2007

T. Nguyen, R. Pei, M. Stojanovic and Q. Lin, "A Microfluidic Affinity Aptasensor," Int. Conf. on Miniaturized Chemical and Biochemical Analysis Systems (MicroTAS '07), pp. 652-654, Paris, France, 2007.
T. Nguyen, R. Pei, M. Stojanovic and Q. Lin, "Smart Microfluidic Preconcentration of Specific Biomolecules," Int. Conf. Solid-State Sensors, Actuators and Microsystems (Transducers '07), pp. 1857-1860, Lyon, France, 2007.
T. Nguyen, R. Pei, M. Stojanovic and Q. Lin, "Programmed Affinity Extraction of Molecules on a Microfluidic Platform," IEEE Int. Conf. Nano/Micro Engineered and Molecular Systems (NEMS '07), pp. 997-1002, Bangkok, Thailand, 2007.
B. Wang, J. Fei, T. Nguyen, R. Gonzalez and Q. Lin, "Translocation of the Ribosome in Temperature-Controlled Microfluidic Channels," Int. Conf. on Miniaturized Chemical and Biochemical Analysis Systems (MicroTAS '07), pp. 796-798, Paris, France, 2007.
B. Wang, J. Fei, T. Nguyen, R. Gonzalez and Q. Lin, "Single-Molecule Detection in Temperature-Controlled Microchannels," IEEE Int. Conf. Nano/Micro Engineered and Molecular Systems (NEMS '07), pp. 972-976, Bangkok, Thailand, 2007.
L. Wang, C.-M. Cheng, P. LeDuc and Q. Lin, "Thermally Adjustable Microlenses for Biological Imaging," IEEE Conference on Sensors (IEEE Sensors '07), pp. 450-453, Atlanta, GA, 2007.

Conferences in 2006

L. Wang and Q. Lin, "A MEMS Nanocalorimeter for Biomolecular Characterization," IEEE Int. Conf. Nano/Micro Engineered and Molecular Systems (NEMS '06), pp. 349-352, Zhuhai, China, 2006.
Y. Wang, T. Mukherjee and Q. Lin, "System-Level Modeling and Design of Microfluidic Concentration Gradient Generators," IEEE Int. Conf. Nano/Micro Engineered and Molecular Systems (NEMS '06), pp. 1368-1373, Zhuhai, China, 2006.
B. Yang and Q. Lin, "Compliance-Based Latchable Microfluidic Actuators Using a Paraffin Wax," IEEE Int. Conf. Micro Electro Mechanical Systems (MEMS '06), pp. 738-741, Istanbul, Turkey, 2006.
B. Yang and Q. Lin, "Compliance-Based Latchable Microfluidic Actuators Using a Paraffin Wax," IEEE Int. Conf. Micro Electro Mechanical Systems (MEMS '06), pp. 738-741, Istanbul, Turkey, 2006.
B. Yang and Q. Lin, "Simulation of a Microfluidic Variable Resistor," Int. Conf. on Miniaturized Chemical and Biochemical Analysis Systems (MicroTAS '06), pp. 92-94, Tokyo, Japan, 2006.
B. Yang and Q. Lin, "Three-dimensional Fluid-Solid Interaction (FSI) Modeling of Passive Microfluidic Diodes," ASME Int. Mechanical Engineering Congress, Microelectromechanical Systems, PAPER # IMECE2006-15803, Chicago, IL, 2006.

Conferences in 2005

W. Khalid, R. Katragadda, Y. Zhao, Q. Lin and Y. Xu, "Biosensors Based on Parylene Cantilevers," Int. Conf. on Miniaturized Chemical and Biochemical Analysis Systems (MicroTAS '05), pp. 1209-1211, Boston, MA, 2005.
Y. Sung, Y. Zhao and Q. Lin, "A Room-Temperature Bonding Technique Using an Ultrathin PDMS Intermediate Layer for Fabrication of Micro- and Nanochannels," ASME Electronic and Photonic Packaging, vol. 5, Electronic and Photonic Packaging, Integration and Packaging of Micro/Nano/Electronic Systems, pp. 269-272, Orlando, FL, 2005.
L. Wang and Q. Lin, "A MEMS Thermal Biosensor for Metabolite Measurements," ASME Int. Mechanical Engineering Congress, Microelectromechanical Systems, PAPER # IMECE2005-79614, Orlando, FL, 2005.
L. Wang and Q. Lin, "A Polymer-Based MEMS Sensor for Biocalorimetric Measurements," Int. Conf. on Miniaturized Chemical and Biochemical Analysis Systems (MicroTAS '05), pp. 1555-1557, Boston, MA, 2005.
L. Wang and Q. Lin, "Theory and Experiments of MEMS Thermal Biosensors," Int. Conf. IEEE Engineering in Medicine and Biology Society, Shanghai, China, 2005.
L. Wang, E. Ng and Q. Lin, "A MEMS Differential Calorimeter for Bimolecular Characterization," IEEE Int. Conf. Micro Electro Mechanical Systems (MEMS '05), pp. 814-817, Miami, FL, 2005.
Y. Wang, R. Magargle, Q. Lin, J.F. Hoburg and T. Mukherjee, "System-Oriented Modeling and Simulation of Biofluidic Lab-on-a-Chip," Int. Conf. on Solid-State Sensors, Actuators and Microsystems (Transducers '05), pp. 1280-1283, Seoul, Korea, 2005.
Y. Wang, Q. Lin and T. Mukherjee, "Composable System Simulation of Dispersion in Complex Electrophoretic Separation Microchips," Int. Conf. Modeling and Simulation of Microsystems (MSM '05), pp. 579-582, Anaheim, CA, 2005.
B. Yang and Q. Lin, "Planar Micro Check Valves Exploiting Large Compliance of PDMS," ASME Int. Mechanical Engineering Congress, Microelectromechanical Systems, PAPER # IMECE2005-81958, Orlando, FL, 2005.
B. Yang and Q. Lin, "Latchable Phase-Change Actuators for Micro Flow Control Applications," ASME Int. Mechanical Engineering Congress, Microelectromechanical Systems, PAPER # IMECE2005-81964, Orlando, FL, 2005.
B. Yang and Q. Lin, "Modeling of a Micro Flow Stabilizing Device for Lab-on-a-Chip Applications," Int. Conf. on Miniaturized Chemical and Biochemical Analysis Systems (MicroTAS '05), pp. 1118-1120, Boston, MA, 2005.
B. Yang, J. Metter, and Q. Lin, "Using Compliant Membranes for Dynamic Flow Stabilization in Microfluidic Systems," IEEE Int. Conf. Micro Electro Mechanical Systems (MEMS '05), pp. 706-709, Miami, FL, 2005.
Y.J. Zhao, A. Davidson, J. Bain, S. Li, Q. Wang, Q. Lin, "A MEMS Viscometric Glucose Monitoring Device," Int. Conf. on Solid-State Sensors, Actuators and Microsystems (Transducers '05), 1816-1819, Seoul, Korea, 2005.

Conferences in 2004

Q. Lin, B. Yang, J. Xie and Y.C. Tai, "Dynamic Analysis of Surface-Micromachined Peristaltic Pumps," Int. Conf. on Miniaturized Chemical and Biochemical Analysis Systems (MicroTAS '04), pp. 596-598, Malmo, Sweden, 2004.
L. Wang and Q. Lin, "Modeling and Characterization of MEMS Thermal Biosensors," ASME Int. Mechanical Engineering Congress, Microelectromechanical Systems, PAPER # IMECE2004-61769, Anaheim, CA, 2004.
Y. Wang, Q. Lin and T. Mukherjee, "Applications of Behavioral Modeling and Simulation on Lab-on-a-Chip: Micro-Mixer and Separation System," IEEE Int. Behavioral Modeling and Simulation Conf., San Jose, CA, 2004.
Y. Wang, Q. Lin and T. Mukherjee, "Analytical Models for Complex Electrokinetic Passive Micromixers," Int. Conf. on Miniaturized Chemical and Biochemical Analysis Systems (MicroTAS '04), pp. 611-613, Malmo, Sweden, 2004.
Y. Wang, Q. Lin and T. Mukherjee, "Composable System Simulation of Dispersion in Complex Electrophoretic Separation Microchips," Int. Conf. Modeling and Simulation of Microsystems (MSM '04), pp. 59-62, Boston, MA, 2004.
Y. Wang, Q. Lin and T. Mukherjee, "Models for Joule Heating in Complex electrophoresis Separation Microchannels," ASME Int. Mechanical Engineering Congress, Microelectromechanical Systems, PAPER # IMECE2004-60970, Anaheim, CA, 2004.
B. Yang, J.W. Levis and Q. Lin, "A PDMS-Based Constant-Flowrate Micro Flow Regulator," Proc. IEEE Int. Conf. Micro Electro Mechanical Systems (MEMS 2004), pp. 379-382, Maastricht, The Netherlands, 2004.
B. Yang, S. Liu, Q. Lin and M. Sitti, "Compliant and Low-Cost Humidity Sensors Using Nano-Porous Polymer Membranes," ASME Int. Mechanical Engineering Congress, Microelectromechanical Systems, PAPER # IMECE2004-59557, Anaheim, CA, 2004.

Conferences in 2003

S. Liu, A. Davidson and Q. Lin, "Simulating Nonlinear Dynamics and Chaos in a MEMS Cantilever Using Poincare Mapping," Int. Conf. on Solid-State Sensors, Actuators and Microsystems (Transducers '03), pp. 1092-1095, Boston, MA, 2003.
A. Pfeiffer, Y. Wang, Q. Lin, R. Magargle, J. Hoburg, T. Mukherjee and S. Hauan, "Design and Optimization of Microchip Based Electrophoretic Channel Topologies," AIChE Annual Meeting, San Francisco, CA, 2003.
Y. Wang, Q. Lin and T. Mukherjee, "Analytical Dispersion Models for Efficient Simulation of Complex Microchip Electrophoresis Systems," Int. Conf. on Miniaturized Chemical and Biochemical Analysis Systems (MicroTAS '03), pp. 135-138, Lake Tahoe, CA, 2003.
B. Yang, G. Lopez and Q. Lin, "Microfabricated PDMS Check Valves," ASME Int. Mechanical Engineering Congress, Microelectromechanical Systems, PAPER # IMECE2003-41213, Washington, DC, 2003.

Conferences in 2002

Y. Wang, Q. Lin and T. Mukherjee, "Universal Joule Heating Model in Electrophoretic Separation Microchips," Int. Conf. on Miniaturized Chemical and Biochemical Analysis Systems (MicroTAS '02), 82-84, Nara, Japan, 2002.
Y. Wang, Q. Lin, J. Hoburg and T. Mukherjee, "Modeling of Joule Heating in Electrophoretic Separation Microchips," Int. Conf. on Modeling and Simulation of Microsystems (MSM '02), 80-83, San Juan, Puerto Rico, 2002.
Y. Xu, F. Jiang, Q. Lin, J. Clendenen, S. Tung and Y.C. Tai, "Underwater shear-stress sensor," IEEE Int. Conf. on Micro Electro Mechanical Systems, pp. 340-343, Las Vegas, NV, 2002.

Conferences in 2000 and Prior

Q. Lin and J.W. Burdick, "On Well-Defined Kinematic Metric Functions," IEEE Int. Conf. on Robotics and Automation (ICRA 2000), pp. 170-177, San Francisco, CA, 2000.
Q. Lin, F. Jiang, X. Wang, Z. Han, Y.C. Tai, J. Lew and C.M. Ho, "MEMS Thermal Shear-Stress Sensors: Experiments, Theory and Modeling," Solid-State Sensor and Actuator Workshop (Hilton Head 2000), pp. 304-307, Hilton Head Island, SC, 2000.
Q. Lin, S. Wu, Y. Yuen, Y.C. Tai and C.M. Ho, "MEMS Impinging-Jet Cooling," ASME Int. Mechanical Engineering Congress, Microelectromechanical Systems, pp.137-142, Orlando, FL, 2000.
S. Wu, Q. Lin, Y. Yuen and Y.C. Tai, "MEMS Flow Sensors for Nanofluidic Applications," IEEE Int. Conf. on Micro Electro Mechanical Systems (MEMS 2000), pp. 745-750, Miyazaki, Japan, 2000.
Y. Xu, C.W. Chiu, F. Jiang, Q. Lin and Y.C. Tai, "Mass Flowmeter Using a Multi-Sensor Chip," IEEE Int. Conf. on Micro Electro Mechanical Systems (MEMS 2000), pp. 541-546, Miyazaki, Japan, 2000.
Q. Lin and J.W. Burdick, "A Task-Dependent Approach to Minimum-Deflection Fixtures," IEEE Int. Conf. on Robotics and Automation (ICRA'99), pp. 1562-1569, Detroit, MI, 1999.
X. Wang, Z. Han, F. Jiang, T. Tsao, Q. Lin, Y.C. Tai, V. Koosh, R. Goodman, J. Lew and C.M. Ho, "A Fully Integrated Shear Stress Sensor," Int. Conf. on Solid-State Sensors and Actuators (Transducers'99), pp. 1074-1077, Sendai, Japan, 1999.
X. Wang, Q. Lin and Y.C. Tai, "A Parylene Micro Check Valve," IEEE Int. Conf. on Micro Electro Mechanical Systems (MEMS'99), pp. 177-182, Orlando, FL, 1999.
Q. Lin, J.W. Burdick and E. Rimon, "Minimum-Deflection Grasps and Fixtures," IEEE Int. Conf. on Robotics and Automation (ICRA'98), pp. 3322-3328, Leuven, Belgium, 1998.
Q. Lin, J.W. Burdick and E. Rimon, "A Quality Measure for Compliant Grasps," IEEE Int. Conf. on Robotics and Automation (ICRA'97), pp. 86-92, Albuquerque, NM, 1997.
Q. Lin, J.W. Burdick and E. Rimon, "Computation and Analysis of Compliance in Grasping and Fixturing," IEEE Int. Conf. on Robotics and Automation (ICRA'97), pp. 93-99, Albuquerque, NM, 1997.

JOURNAL PUBLICATIONS

PEER-REVIEWED CONFERENCE PUBLICATIONS

OTHER CONFERENCE PUBLICATIONS AND PRESENTATIONS